How to Prevent Car Stereo Draining Battery

Car stereo drain battery is a common problem. If your car stereo is draining the car’s battery when the car engine isn’t running, you can remove the ground from the stereo to eliminate this issue. Some car stereo devices drain your battery at a faster rate than others. But you can take some preventative measures to stop this from happening.

The first step is to find out what type of device you have in your car. You can do this by looking on the back of the stereo device or on your car dashboard. If it says the type of car system is “DIN” then it’s a standard system and won’t drain your battery as fast as an “ISO” system would.

 

You should also turn off any features that you’re not using, such as Bluetooth or CDs, and use a low-power FM transmitter instead of playing music from your phone or computer wirelessly.

 

What is a Car Stereo and Why does it Drain Battery?

A car stereo is an audio component that is installed in a car. They are manufactured to give voice to the passengers in the car. Typically, car stereos consume a lot of power because they use electricity to amplify sound, operating amplifiers and speakers that require more power than other components in the vehicle.

Car stereos come with different power requirements for different vehicle models. Some consume more power than others while some consume none at all, which is why you are advised to buy one with a wattage requirement that suits your vehicle’s needs.

 

What To Do When The Car Audio System Suddenly Drains The Battery?

Most of the time, the problem is not the stereo itself but the car battery. This is because, when cars are turned off, they still maintain some electrical power that can be used by peripheral devices like air conditioners or stereos. One of the first things to do is check whether you have an auxiliary power adapter in your car. If you do, then plugging it in should help you start your car again and charge your battery at the same time.

 

If you don’t have an adapter on hand, then try turning on your engine for a little bit to see if it will charge up enough power for your stereo to work again. However, this might not be a safe idea if there’s a risk of flooding your engine with too much fuel and causing damage. In this case, you may have to scale down the size of your speakers because your car can’t handle them. The car’s battery has a limited power, so it might have been drained without an appropriate recharge. Below, I will go over what you can do to help your case :

 

Problem With the Wiring

In this scenario, you have most likely just installed a new stereo system in your car or vehicle only to realize that it is drawing on your car’s battery. If you have done the wiring yourself, then you may not have considered all the factors. This is why your stereo might function unintended and drain your battery.

 

The car stereo should come with a cable guide, but the instructions may be unclear or unhelpful. If you can’t solve the problem yourself, take the system in for service. There may be a solution to this problem, and it can be solved quickly, with the help of a professional.

 

Check the Fuse Terminal

Constant fuses are always powered, even when the car’s engine is off. Switched fuses, on the other hand, only receive power when the engine is running. If you connect your stereo to a constant fuse while your car is not running, it will continuously draw power from the battery. This unreasonable demand could end up depleting the charge in your battery and lead to a difficult starting process.

 

Every car will have a slightly different fuse box arrangement. There is only one way to be sure which fuses are constant and switched: you must manually test them. You will need a voltage continuity and current testing device to perform this task. When you purchase a device to make sure your electrical circuit is safe, you want a product that’s simple to use and reliable.

One tester I can recommend is Katzco’s Current Tester . It’s easy to use, and it works well.

 

Problem With the Stereo

If your car stereo suddenly drains your battery, it’s probably not because of a faulty wiring system. It’s more likely that there’s something wrong with the stereo itself.  The stereo is actually pretty smart. It has a circuit board that controls what happens. It’s kind of like the brain. When you turn it on and off, the board is doing that. It’s like a series of relays that run through it to make the stereo do what you want it to do — turn on or off, play different songs, etc.

 

As your car stereo gets older and you change the battery, some of its circuits may wear out and not work as they should. This can create a situation where your stereo is not going to sleep when it should. In the end, this will drain your battery.

Even though your stereo may appear to be working, it may still have a glitch that is causing it to drain your battery. If you can’t figure out how to fix it, you can always get a new stereo. If you can’t find your stereo’s car relay, don’t bother trying to fix it. You’re probably better off taking it to a mechanic. It’s usually not worth the time and effort to try to fix a problem like this yourself.

 

If you can’t find the problem, then a new stereo will solve it. If you find the problem and need to fix it, then you can just do that. Fuse hookup is the only thing you’ll need to avoid when installing your new stereo. Meanwhile, shut down the music to prevent it from draining your battery.

 

Battery / Alternator

The third and final reason why your car stereo may be draining your car’s battery is that the system is too powerful for your vehicle. Also, the alternator and battery in your car may not be able to accommodate it. There is a way to get more sound out of your stereo, but it will never be as good as the system in a concert hall.

 

Your stereo’s power needs must be balanced by the alternator. If your stereo requires too much power from the alternator, it may drain the battery. This is called “outrunning” and means that your stereo is outrunning the battery, and your alternator can’t keep up with charging it back up.

If you have a car with a stereo that eats up the battery, there are two ways to solve the problem. One is to upgrade your battery. The other is to add an auxiliary (second) battery.

see also how to add dual battery for your car

 

Conclusion:

Installing the Best Car Audio System for Your Needs Can Save You Money on Maintenance and Repair

 

The installation of a car audio system is not as easy as one might think. There are many things to consider such as the quality of sound that you want to hear from your speakers and what type of music you listen too. These considerations will determine which type of amplifier and speaker system to buy and install in your vehicle.

You should also make sure that you find a repair service near you if things go wrong with your car audio system installation because every time you make an installation mistake, there is a chance it will cause permanent damage to your vehicle’s electrical system.

 

source:

fix car stereo draining battey

how stereo – drain your battery

Leave a Comment